Kayayyaki

Ƙarshen Jagora zuwa Nau'in Haɓaka Bita Daban-daban: Yadda Ake Zaɓan Kayan Aikin da Ya dace don Ayuba

Dezhou Drillstar Cutting Tool Co., Ltd. a hukumance ya dawo samarwa a cikin yanayi mai ban sha'awa da ban sha'awa.

Dezhou Drillstar Cutting Tool Co., Ltd. 2026 Shekarar Dokin Gala: Nasarar Nasarar Mahimmanci - Ƙirƙirar Madaidaici, Hawan Iskar Ci gaba





Maɓallin Fuka-Ƙaƙwalwar Bindigu na Carbide (Maɓallin Jagoran hako rami mai zurfi)

Maɓallin Fuka-Ƙaƙwalwar Bindigu na Carbide (Maɓallin Jagoran hako rami mai zurfi)

Maɓalli na harbin bindigar carbide ainihin jagora ne da aka tsara da kuma wurin sanyawa don maƙallan bindigar carbide (kayan aikin hako rami mai zurfi). Yana tabbatar da tsayayyen yankan, daidaitaccen daidaitaccen ramin, da kuma tsawon rayuwar kayan aiki yayin aikin injin rami mai zurfi mai zurfi. An yi shi da ƙirar tungsten carbide (WC-Co) tare da fasahar sutura ta ci gaba, yana ba da juriya na musamman da ƙarfin ɗaukar nauyi a cikin mahallin injina.

Ƙaddamar da buƙata

  

Bayani

alama

Abun ciki Boye

1 Ƙididdiga na Fasaha

2 Mabuɗin Abubuwan Samfur

3 Filin Aikace-aikace

4 Me yasa Zaba Maɓallin Fuskar Jirgin Ruwa na Carbide?

Ƙididdiga na Fasaha

Abu	Cikakkun bayanai
Kayan abu	Tungsten Carbide (WC-Co, Grade: K10/K15/K20) + PVD/TiAlN Rufi
Tauri	88-92 HRA (ko 1500-1800 HV)
Girman Rage	Nisa: 3-20 mm; Length: 8-50 mm (wanda aka saba da shi ta DIN 6885 ko ƙayyadaddun abokin ciniki)
Nau'in Rufi	Balzers PVD Coating (yana rage juriya, yana haɓaka juriya)
Tashin Lafiya	0.1-0.8 m
Ƙarfin Ƙarfi	≥1800 MPa
Yanayin Aiki	Har zuwa 600°C (1112°F)
Hakuri	± 0.01 mm (madaidaicin inji)
Keɓancewa	Akwai (girman, shafi, taurin kowane buƙatun abokin ciniki)

Mabuɗin Abubuwan Samfur

• Resistance Wear na Musamman: Tungsten carbide abu + PVD shafi yana tabbatar da tsawon rayuwar sabis na 10 × fiye da maɓallan ƙarfe, rage mitar kayan aiki.

• Babban Mahimmanci: Haƙuri mai ƙarfi (± 0.01 mm) yana ba da tabbacin jagorar tsayayye don aikin harbin bindiga, kiyaye madaidaiciyar rami (0.3 mm/1000 mm) da coaxiality (0.5 mm/1000 mm).

• Low Friction: PVD coating minimizes friction between the key and drill, preventing overheating and chip adhesion.

• High Load-Bearing Capacity: Withstands high torque and cutting forces in deep-hole drilling (depth-to-diameter ratio up to 250:1).

• Juriya na Lalacewa: Yana ƙin lalacewa na sinadarai daga yankan ruwa, dace da injin rigar.

Filin Aikace-aikace

Ana amfani da wannan maɓallin gashin tsuntsu sosai a cikin ayyukan hako bindiga mai zurfi a cikin masana'antu:

• Kera Motoci: Tubalan injin hakowa, crankshafts, kawunan silinda, da abubuwan chassis.

• Aerospace: Machining aluminum gami sassa tsarin sassa, turbine ruwan wukake, da na'ura mai aiki da karfin ruwa tsarin sassa.

• Mold & Die Industry: Hakowa tashoshi sanyaya da sanya ramukan a cikin mold karfe (misali, P20, H13).

• Kayayyakin Mai & Gas: Samar da bututun hakowa, kayan aikin famfo, da tasoshin matsa lamba.

• Hydraulics & Pneumatics: Hana madaidaicin ramuka a cikin silinda na hydraulic da jikin bawul.

• Injinan Gabaɗaya: Machining madaidaicin sassa (gears, shafts) suna buƙatar zurfin, daidaitattun ramuka.

Me yasa Zaba Maɓallin Fuskar Jirgin Ruwa na Carbide?

• Maɗaukaki Mai Ƙarfi: Shigo da tungsten carbide foda (Jamus / Japan) yana tabbatar da daidaiton aiki.

• Advanced Manufacturing: CNC nika + injin shafi don m girma iko.

• Tasirin Kuɗi: Tsawon rayuwar sabis yana rage raguwar samarwa da farashin kayan aiki.

• Magani na al'ada: Madaidaitan masu girma/rufi don dacewa da takamaiman ƙirar harbin bindiga (misali, Iscar, Guhring, ko kayan aikin al'ada).

A baya Na gaba

Tuntube mu

Shahararrun Samfura masu dangantaka

Bushing

Kamfaninmu yana kera bushings na Stelite gami ta hanyar simintin gyare-gyare na daidaitaccen simintin gyare-gyare ko tsarin ƙarfe na foda, waɗanda ake amfani da su sosai a cikin bawuloli daban-daban. A waje diamita na samfurin jeri daga φ10 mm zuwa φ600 mm, da kuma ciki diamita jeri daga φ5 mm zuwa 500 mm. Hakanan ana samun samarwa na musamman bisa ga buƙatun abokin ciniki.

Kara karantawa 🡥

Hakoran Kwallon Carbide

Haƙoran ƙwallon Carbide, wanda kuma aka sani da saka ƙwallon ƙwallon carbide, hakoran ƙwallon tungsten carbide, ko zaɓen conical, takamaiman nau'in ɓangaren lalacewa ne da kayan aikin yankan da ke ɗauke da kawunansu na hemispherical (mai siffar ƙwallon ƙafa) wanda aka yi da tungsten carbide. An tsara su da farko don tasiri mai ƙarfi, murkushewa, da aikace-aikacen niƙa, maimakon daidaitaccen sheke ko yanka. Ƙirarsu ta musamman tana ba su damar watsa ƙarfin ɗaukar nauyi a cikin kayan, yana mai da su manufa don karya abubuwa masu wuyar gaske da abrasive.

Kara karantawa 🡥

DR Hydraulic Scrapinghob Drill

DR jerin yankan kayan aikin aka yafi amfani da sarrafa sanyi kõma rubes, daidaici kõma rubes da sanyi birgima rubes-

Kara karantawa 🡥

SAURAN JUYA 150L Kayan aikin Injin Hannu na Biyu

Sigar samfur Jafananci MAZAK Kayan aikin Injin Samfuran Ƙirƙirar Kwanan Ƙarshen Confi...

Kara karantawa 🡥

Bututun ƙarfe

Ragewa wata muhimmiyar fasaha ce ta kare muhalli, wacce aka ƙera don rage fitar da iskar nitrogen oxide da masana'antu ke samarwa kamar masana'antar wutar lantarki. A cikin tsarin ƙirƙira na kamfani, Stelite gami nozzles suna aiki azaman mahimman abubuwan haɗin gwiwa. Ana amfani da su don fesa wakilai na denitration, inganta halayen da ke tsakanin nitrogen oxides da wakilai na denitration don canza su zuwa abubuwa marasa lahani, wanda ke inganta ingantaccen aiki da kwanciyar hankali na tsarin ƙididdiga kuma yana rage farashin kulawa.

Kara karantawa 🡥

Na'ura mai zurfi mai zurfi na Hydraulic Broaching Machine

1.Equipment model: LK2120-5000 2. Rated tashin hankali: 150kN 3. Maximum bugun jini: 5000mm 4.Equipment amfani: Ana amfani da kayan aiki don aiwatar da m gubar da kuma wadanda ba m gubar na ciki spirals, kazalika da mikakke grooves, kuma ya dace da sarrafa kayayyakin da daidai bango kauri stators.

Kara karantawa 🡥

Tsarin Samfuran PDC

Wuraren Sabis Screw Motors, Rotary Steerable Systems, Downhole Drilling Tools, da dai sauransu ...

Kara karantawa 🡥

Tarin Carbide

Gilashin Carbide, wanda kuma aka sani da tungsten carbide tube ko simintin sandunan simintin carbide, guda huɗu ne ko siffa mai siffar sanduna waɗanda aka yi daga tungsten carbide. An ƙera su don samar da ingantacciyar juriya ta lalacewa azaman layin kariya ko yankan gefuna akan injuna da kayan aikin da aka yiwa ƙazanta mai tsanani.

Kara karantawa 🡥

Stator for Petroleum Equipment

Ana amfani da stators na Stellite alloy a cikin janareta na masu gano rijiyoyin mai zurfi, suna aiki a matsayin muhimmin sashi a cikin kayan aikin toshe mai. Tunda suna aiki cikin babban sauri kuma suna haɗuwa da ruwaye kamar laka da tsakuwa yayin hidima, ana buƙatar su mallaki kyakkyawan juriya na lalacewa, juriya mai lalata da ƙaƙƙarfan abu mai kyau. Stellate 6 alloy daidai yake magance duk buƙatun da ke sama.

Kara karantawa 🡥

Deep Hole Honing Tool

Wannan Kayan Aikin Hoto ne na Deep Hole (wanda kuma aka sani da Mandrel Honing Tool), ainihin kayan aikin gamawa wanda aka ƙera don gyaran ƙasa na ciki na ramuka masu zurfi tare da girman zurfin-zuwa diamita. Yana da manufa don cimma matsaya mai laushi da kuma juriya mai ƙarfi a cikin masana'antu kamar sararin samaniya, na'urorin lantarki, da masana'anta.

Kara karantawa 🡥

Kayan Aikin Centrifuge Wear-Resistant Plate

Ana amfani da faranti masu jurewa da ƙarfe na ƙarfe a kan kayan aikin centrifuge a cikin masana'antar sarrafa abinci. Godiya ga kyakkyawan lalacewa da juriya na lalata, suna aiki azaman babban juzu'i mai jujjuyawa a cikin yanayin matsakaicin acidic na kayan aiki, yana jure juriya mai ƙarfi da tasirin tasirin tasiri tsakanin abubuwan da aka gyara, wanda ya rage rage lokacin kayan aiki don kiyayewa.

Kara karantawa 🡥

Wurin Wuta

Wurin zama na bawul abu ne na gama gari a cikin bawuloli, tare da diamita na waje daga 10 mm zuwa 700 mm da diamita na ciki daga 5 mm zuwa 600 mm. Wurin zama na bawul ɗin Stellite nau'in kayan rufewa ne mai wuyar fuska, kuma ana amfani dashi ko'ina saboda kyawawan kaddarorin sa kamar juriya na cavitation da juriya na lalata. Kamfaninmu yana kera kujerun bawul ɗin bawul ɗin Stelite ta hanyar ɗaukar madaidaicin simintin simintin yanayi, madaidaicin simintin ƙarfe ko matakan ƙarfe na foda.

Kara karantawa 🡥

Injin Taɓawa da Niƙa

Bayanin Samfura Wannan injin yana fasalta ƙaƙƙarfan ƙira mai ɗaukuwa, manufa don on-si...

Kara karantawa 🡥

Masu yankan waƙafi

Abubuwan yankan waƙafi (wanda kuma aka sani da masu yankan waƙafi ko masu yankan waƙafi) takamaiman ne...

Kara karantawa 🡥

Square CNC juyawa abubuwan da aka saka

Square CNC juya abun da ake sakawa ɗaya ne daga cikin kayan aikin yankan da aka saba amfani da su a cikin hanyoyin juyawa na CNC.

Kara karantawa 🡥

Rotary fayil

Rotary fayil babban madaidaicin kayan aikin ƙarfe ne da ake amfani da shi don ɓarna, tsarawa, chamfering, tsagi da ƙare kayan aikin ƙarfe. Kayan aikin injin CNC, injin niƙa, injin injin lantarki da sauran kayan aikin ke motsa shi don jujjuya cikin babban sauri, fahimtar ingantaccen aiki na fage mai rikitarwa da kayan aiki marasa daidaituwa.

Kara karantawa 🡥

Продукция

Kayayyaki

Ƙarshen Jagora zuwa Nau'in Haɓaka Bita Daban-daban: Yadda Ake Zaɓan Kayan Aikin da Ya dace don Ayuba

Dezhou Drillstar Cutting Tool Co., Ltd. a hukumance ya dawo samarwa a cikin yanayi mai ban sha'awa da ban sha'awa.

Dezhou Drillstar Cutting Tool Co., Ltd. 2026 Shekarar Dokin Gala: Nasarar Nasarar Mahimmanci - Ƙirƙirar Madaidaici, Hawan Iskar Ci gaba

Maɓallin Fuka-Ƙaƙwalwar Bindigu na Carbide (Maɓallin Jagoran hako rami mai zurfi)

Bayani

alama

Ƙididdiga na Fasaha

Mabuɗin Abubuwan Samfur

Filin Aikace-aikace

Me yasa Zaba Maɓallin Fuskar Jirgin Ruwa na Carbide?

Tuntube mu

* Suna

*Imel

Waya / WhatsApp / WeChat

* Abin da zan ce.

Shahararrun Samfura masu dangantaka

Bushing

Hakoran Kwallon Carbide

DR Hydraulic Scrapinghob Drill

SAURAN JUYA 150L Kayan aikin Injin Hannu na Biyu

Bututun ƙarfe

Na'ura mai zurfi mai zurfi na Hydraulic Broaching Machine

Tsarin Samfuran PDC

Tarin Carbide

Stator for Petroleum Equipment

Deep Hole Honing Tool

Kayan Aikin Centrifuge Wear-Resistant Plate

Wurin Wuta

Injin Taɓawa da Niƙa

Masu yankan waƙafi

Square CNC juyawa abubuwan da aka saka

Rotary fayil

Da fatan za a bar mana sako

* Suna

*Imel

Waya / WhatsApp / WeChat

* Abin da zan ce.