Lihlahisoa

Tataiso ea ho qetela ea Mefuta e fapaneng ea ho Drill Bit: Mokhoa oa ho Khetha Sesebelisoa se Nepahetseng Bakeng sa Mosebetsi

Dezhou Drillstar Cutting Tool Co., Ltd. e ile ea qala ka molao tlhahiso har'a moea o monate le o monate.

Dezhou Drillstar Cutting Tool Co., Ltd. 2026 Selemo sa Horse Gala: Katleho e Hlollang - Ho Theha ka nepo, ho Palama Moea oa Tsoelo-pele.





Carbide Gun Drill Feather Key (Senotlolo sa Deep-Hole Drilling Guide)

Carbide Gun Drill Feather Key (Senotlolo sa Deep-Hole Drilling Guide)

Senotlolo sa "carbide drill drill feather" ke tataiso e nepahetseng le karolo ea boemo bakeng sa ho phunya lithunya tsa carbide (lisebelisoa tsa ho cheka mekoti e tebileng). E netefatsa ho itšeha ho tsitsitseng, ho tsamaisana hantle le lesoba, le bophelo bo atolositsoeng ba lisebelisoa nakong ea machining a tebileng a tebileng. E entsoe ka premium tungsten carbide (WC-Co) e nang le theknoloji e tsoetseng pele ea ho roala, e fana ka khanyetso e ikhethang ea ho apara le matla a ho jara moroalo libakeng tse thata tsa mochini.

Kenya kopo

  

Tlhaloso

lesupa

Litaba Ipate

1 Litlhaloso tsa Tekheniki

2 Lintlha tsa Sehlahisoa sa Bohlokoa

3 Libaka tsa Kopo

4 Hobaneng ha re Khetha Senotlolo sa rona sa Masiba sa Carbide Gun Drill?

Litlhaloso tsa Tekheniki

Ntho	Lintlha
Lintho tse bonahalang	Tungsten Carbide (WC-Co, Kereiti: K10/K15/K20) + PVD/TiAlN Coating
Ho thatafala	88–92 HRA (kapa 1500–1800 HV)
Boholo Range	Bophara: 3-20 mm; Bolelele: 8–50 limilimithara (e ka rekoa ho latela DIN 6885 kapa lintlha tsa bareki)
Mofuta oa ho roala	Balzers PVD Coating (e fokotsa likhohlano, e ntlafatsa ho hanyetsa ho apara)
Bokhopo ba Sekaho	Ra 0.1–0.8 μm
Tensile Matla	≥1800 MPa
Mocheso oa ho sebetsa	Ho fihla ho 600°C (1112°F)
Mamello	±0.01 limilimithara (mochine o nepahetseng haholo)
Boikemisetso	E fumaneha (boholo, ho roala, ho thatafala ho latela litlhoko tsa bareki)

Lintlha tsa Sehlahisoa sa Bohlokoa

• Khanyetso e Ikhethileng ea ho Oa: Letlapa la Tungsten carbide + PVD e tiisa bophelo ba tšebeletso ea 10× nako e telele ho feta linotlolo tsa tšepe, ho fokotsa maqhubu a ho fetola lisebelisoa.

• Ho nepahala ho Phahameng: Ho mamellana ka thata (± 0.01 mm) ho tiisa tataiso e tsitsitseng bakeng sa ho phunya lithunya, ho boloka masoba a otlolohileng (0.3 mm/1000 mm) le coaxiality (0.5 mm/1000 mm).

• Khohlano e Tlaase: Ho roala ha PVD ho fokotsa khohlano pakeng tsa senotlolo le boro, ho thibela ho futhumala ho feteletseng le ho khomarela chip.

• Bokhoni bo Phahameng ba ho Jara Moroalo: E mamella torque e phahameng le matla a ho itšeha ha ho cheka mekoti e tebileng (karolelano ea botebo ho isa ho bophara ho fihla ho 250:1).

• Corrosion Resistance: E hanela ho koaheloa ke lik'hemik'hale tse tsoang marong a sehang, a loketseng bakeng sa mochini o metsi.

Libaka tsa Kopo

Senotlolo sena sa masiba se sebelisoa haholo tšebetsong ea ho phunya lithunya tse tebileng ho pholletsa le liindasteri:

• Ho Etsa Likoloi: Li-block tsa enjine ea ho cheka, li-crankshaft, lihlooho tsa lisilindara le likarolo tsa chassis.

• Aerospace: Ho sebetsa likarolo tsa sebopeho sa aluminium alloy, mahare a turbine, le likarolo tsa tsamaiso ea haeteroliki.

• Indasteri ea Mold & Die: Ho cheka likanale tsa ho pholile le ho beha masoba ka tšepe ea hlobo (mohlala, P20, H13).

• Thepa ea Oli le Khase: Ho etsa lipeipi tsa ho phunya, likarolo tsa pompo le likepe tsa khatello.

• Li-Hydraulics & Pneumatics: Ho phunya masoba a nepahetseng haholo ka har'a lisilindara tsa haeteroliki le 'mele ea li-valve.

• Mechini e Akaretsang: Ho etsa likarolo tse nepahetseng (li-gear, shafts) tse hlokang masoba a tebileng, a nepahetseng.

Hobaneng ha re Khetha Senotlolo sa rona sa Masiba sa Carbide Gun Drill?

• Boitsebiso bo Phahameng ka ho Fetisisa: Ho romelloa ka ntle ho tungsten carbide powder (Jeremane / Japane) e tiisa ts'ebetso e tsitsitseng.

• Tlhahiso e Tsoetseng Pele: Ho sila ha CNC + vacuum coating bakeng sa taolo e thata ea likarolo.

• Theko e Ntle: Bophelo bo bolelele ba tšebeletso bo fokotsa nako ea tlhahiso le litšenyehelo tsa lisebelisoa.

• Litharollo tse Tloaelehileng: Lisaese/liaparo tse lokiselitsoeng ho lumellana le mefuta e itseng ea lithunya (mohlala, Iscar, Guhring, kapa lithulusi tsa tloaelo).

E fetileng E latelang

Ikopanye le rona

Related Popular Products

Mochini oa PC103-I21-C10-EU o sebetsang ka mokhoa o phahameng oa ho fokotsa mocheso bakeng sa 3-32 mm Carbide Steel

PC103-I21-C10-EU ke mochine oa mocheso o phahameng o sebetsang hantle o loketseng carbide le lisebelisoa tsa ho itšeha ka lebelo le phahameng le li-shank diameters tsa Ø 3-32 mm. E ka nyolleloa ho khoele ea ho futhumatsa ea 20KW HD bakeng sa ho futhumatsa mocheso oa thipa e honyelang ho fihla ho Ø 50 mm ka bophara (ho ikhethela)

Bala haholoanyane 🡥

TD102-H01-EU Mochini o Matlafalitsoeng oa Moruo oa Moruo oa Matla o Matla (O Motšo/O Mosoeu)

Mochini ona o matlafalitsoeng oa ho leka-lekanya o ka etsa litekanyo tsa ho leka-lekanya tse matla tsa lifofane tse peli (dynamic dynamic balancing) ea workpiece. Lisebelisoa tse telele li hloka litekanyo tse leka-lekaneng tsa lifofane tse peli / tse matla ho felisa litlamorao tsa ho se leka-lekane.

Bala haholoanyane 🡥

PDC Bearing Product Series

Libaka tsa Ts'ebeletso Screw Motors, Rotary Steerable Systems, Downhole Drilling Tools, joalo-joalo ....

Bala haholoanyane 🡥

Thibelo e sa Thing ea Carbide Wear-Resistant

Sebaka sa samente sa carbide se sa khoneng ho apara bakeng sa jeoloji le sebaka sa merafo ke karolo ea carbide e nang le sebopeho sa block e etselitsoeng maemo a phahameng a ho apara mesebetsing ea jeoloji le merafo. E ithorisa ka boima bo phahameng haholo, ho hanyetsa le ho ba le tšusumetso e matla. E ka kenngoa ka kotloloho holim'a lisebelisoa tsa merafo (tse kang li-crusher liners, meno a bakete ea excavator, scraper conveyor guides, joalo-joalo), e ka fokotsang haholo ho apara ha lisebelisoa, ho ntlafatsa ts'ebetso ea ts'ebetso, le ho ikamahanya le maemo a thata a ts'ebetso a kang ho pshatla ha majoe le lipalangoang tsa tšepe.

Bala haholoanyane 🡥

Thepa ea metsi ea Carbide

Poleloana "Carbide Water Tap" hangata ha e bue ka faucet e tloaelehileng ea lelapa. Ho e-na le hoo, e hlalosa karolo e khethehileng ea li-valve tsa tungsten carbide kapa pompo e thibelang ho roala e sebelisoang ho laola ho phalla ha metsi, slurry, kapa maro a mang a abrasive libakeng tsa indasteri. Tlhaloso ea "carbide" e bontša hore likarolo tsa bohlokoa tsa ho roala ha valve ena li entsoe kapa li sirelelitsoe ke tungsten carbide ho netefatsa nako e telele haholo.

Bala haholoanyane 🡥

PC103-I21-C10-EU Mocheso o Phahameng oa Mocheso o Honyetseng Thipa bakeng sa Sekhabiso sa Litšepe se Phahameng sa Lebelo

Bala haholoanyane 🡥

Alloy ea Stellite

Stellite alloy ke sesebelisoa sa alloy se nang le mocheso o phahameng se nang le khanyetso e ntle ea mocheso o phahameng, ho hanyetsa kutu le ho se mamelle. E sebelisoa haholo ho aerospace, aero-engines, petrochemicals, lisebelisoa tsa bongaka le likarolo tse ling. Lintlha tse latelang ke tlhaloso e qaqileng ea lihlopha tsa lihlahisoa, melao ea lihlopha, libaka tsa kopo, le melemo ea li-alloys tsa Stellite.

Bala haholoanyane 🡥

Carbide Gun Drill (Deep Hole Cutting Insert)

Sebono sena sa sethunya sa carbide, se tsejoang hape e le ho cheka sekoti se tebileng, se emela tharollo e tsoetseng pele le e sebetsang bakeng sa machining a lesoba le tebileng. E kopanya ho cheka, ho bora le ho tsosolosa ts'ebetsong e le 'ngoe, e nolofalletsang ho sebetsana le lesoba le phahameng - ho nepahala ka mokhoa o le mong. E entsoe ka thepa ea premium carbide e nang le litlolo tse khethehileng le moralo oa sebopeho, e sebetsa hantle ho sebetsana le maemo a thata a machining ha e ntse e boloka botsitso bo botle le bophelo bo bolelele ba ts'ebeletso, e e etsa sesebelisoa sa mantlha sa tlhahiso e nepahetseng ho liindasteri tse ngata.

Bala haholoanyane 🡥

Stellite Alloy Welding Electrode

Li-electrode tsa stellite alloy welding li entsoe ka likarolo tse ngata tse kang Co, Cr, W le Mo, 'me li na le khanyetso e ntle ea ho apara, ho hanyetsa mocheso o phahameng le ho hanyetsa kutu. Nakong ea ts'ebetso ea welding, li-electrode tsena li netefatsa hore manonyeletso a cheselitsoeng a na le khanyetso e ikhethang ea ho roala le botsitso ba boleng. Li-electrode tsa Stellite alloy welding tse hlahisoang ke k'hamphani ea rona li amohela mokhoa o sa khaotseng oa ho lahla, o nang le bophara ba φ3mm ho isa ho φ7mm, 'me bolelele ba ona bo ka etsoa ho latela litlhoko tsa bareki.

Bala haholoanyane 🡥

Six Axis Drilling And Milling Composite Deep Hole Drill (Habeli Spindles)

Mochini oa RFD6ZX1010-1000 oa ho phunya li-axis tse tšeletseng le ho sila motsoako o tebileng oa ho phunya lesoba o sebelisoa haholo-holo bakeng sa ho cheka le ho sila. E na le turntable ea CNC e nepahetseng haholo (B-axis) le axis ea ho potoloha ea tafole e thellang (A-axis), e ka phethela ho cheka le ho sila ka mahlakore a mahlano ka clamping e le 'ngoe. Sena se holisa mofuta oa ts'ebetso ea mochini, se fokotsa linako tsa ho koala, se ntlafatsa haholo ts'ebetso e nepahetseng le ts'ebetso e ntle, 'me se boloka litšenyehelo tsa tlhahiso ka katleho. E sebelisoa haholo-holo bakeng sa ts'ebetso ea sekoti sa oblique ka hlobo, likarolo tsa mochini, joalo-joalo.

Bala haholoanyane 🡥

Likhetho tsa Mashala

Likhetho tsa Mashala, tse tsejoang hape e le likhetho tsa merafo, likhetho tsa conical, kapa likhetho tsa majoe, ke lisebelisoa tsa bohlokoa tsa ho itšeha tse sebelisoang indastering ea merafo le ea likotopo. Li etselitsoe ka ho khetheha ho pshatla le ho epolla lisebelisoa tse kang mashala, majoe a bonolo, le liminerale tse ling ka ho kenngoa holim'a meqomo e bilikang ea basebetsi ba merafong, lihlooho tsa litsela le bakuti. Mosebetsi oa bona o ka sehloohong ke ho sebetsa e le ntlha ea tlhaselo, ho fetisetsa matla a mochine ka tšusumetso e tebileng le matla a ho kuta ho senya thepa.

Bala haholoanyane 🡥

Leqephe la motsoako oa B6 Stellite Alloy

Lipoleiti le li-strip tsa alloy li bonts'a ts'ebetso e phethahetseng maemong a mocheso o phahameng, ho roaloa ka matla le ho senya ka lebaka la mochini oa tsona o ikhethang oa ho sesa, 'me li sebelisoa haholo sebakeng sa sefofane, matla a nyutlelie, petrochemical, papermaking, lisebelisoa tsa bohlokoa le likarolo tse ling.

Bala haholoanyane 🡥

Motsoako oa Plate Substrat

A Composite Sheet Substrate e bua ka thepa ea motheo, eo hangata e leng sebopeho sa lakane, e entsoeng ka mekhahlelo e 'meli kapa ho feta e fapaneng ea 'mele kapa ea lik'hemik'hale e kopantsoeng ho theha thepa e ncha e nang le thepa e phahameng ha e bapisoa le likarolo tsa eona. Maemong a tsoetseng pele a indasteri, hangata sena se kenyelletsa ho kopanya matrix a thata, a ductile (joaloka tšepe kapa polymer) le karolo e thata, e matlafatsang (joaloka likaroloana tsa ceramic kapa likhoele) ho fihlela ho leka-lekana ha matla, ho tiea, le lisebelisoa tse ling tse khethehileng tse sebetsang. Li-substrates tsena li etselitsoe ho sebetsa e le sethala sa motheo bakeng sa ts'ebetso e tsoelang pele kapa e le karolo ea mantlha ea likopo tse hlokahalang.

Bala haholoanyane 🡥

Nozzle

Hangata li-nozzles li sebetsa maemong a mocheso o phahameng le a senyang, kahoo lisebelisoa tse nang le khanyetso e phahameng ea mocheso le tse matla tse hanyetsanang le kutu lia hlokahala. Hangata li etsoa ho tloha ho Stellite 6 le Stellite 12. Li-nozzles tsena li atisa ho sebelisoa ha ho etsoa metsoako ea li-fluid catalytic cracking unit (FCCU) reactor le li-regenerator ho hloekisa peterole.

Bala haholoanyane 🡥

Stellite Alloy Valve Probe bakeng sa Indasteri ea Petrochemical

Li-stellite alloy probes li sebelisoa haholo mecheng ea litaba tse nang le asiti le libakeng tse senyang ka har'a indasteri ea oli le khase. The Stellite alloy probes e entsoeng ke k'hamphani ea rona e sebelisang phofo ea metallurgy e ithorisa ka ho hanyetsa ho apara le ho hanyetsa ho bola, e leng se etsang hore e be e 'ngoe ea likarolo tsa bohlokoa tsa li-valve.

Bala haholoanyane 🡥

HMS25 HMS35 HMS50 Deep Hole Honing Machine

HMS25 HMS35 HMS50 Deep Hole Honing Machine e sebelisoa ka ho khetheha bakeng sa ho qeta bokahare ba lesoba le ka hare la lisilindara tse fapaneng tsa hydraulic, li-cylinders le likarolo tse ling tsa cylindrical. Ka mor'a ho sebetsa ka mochine, ho nepahala ha karolo ea aperture ho fihla ka holimo ho eona7, 'me bokaholimo bo fihla ho ra0.2-0.4 μm.

Bala haholoanyane 🡥

Продукция

Lihlahisoa

Tataiso ea ho qetela ea Mefuta e fapaneng ea ho Drill Bit: Mokhoa oa ho Khetha Sesebelisoa se Nepahetseng Bakeng sa Mosebetsi

Dezhou Drillstar Cutting Tool Co., Ltd. e ile ea qala ka molao tlhahiso har'a moea o monate le o monate.

Dezhou Drillstar Cutting Tool Co., Ltd. 2026 Selemo sa Horse Gala: Katleho e Hlollang - Ho Theha ka nepo, ho Palama Moea oa Tsoelo-pele.

Carbide Gun Drill Feather Key (Senotlolo sa Deep-Hole Drilling Guide)

Tlhaloso

lesupa

Litlhaloso tsa Tekheniki

Lintlha tsa Sehlahisoa sa Bohlokoa

Libaka tsa Kopo

Hobaneng ha re Khetha Senotlolo sa rona sa Masiba sa Carbide Gun Drill?

Ikopanye le rona

* Lebitso

*Email

Fono / WhatsApp / WeChat

* Seo ke lokelang ho se bua.

Related Popular Products

Mochini oa PC103-I21-C10-EU o sebetsang ka mokhoa o phahameng oa ho fokotsa mocheso bakeng sa 3-32 mm Carbide Steel

TD102-H01-EU Mochini o Matlafalitsoeng oa Moruo oa Moruo oa Matla o Matla (O Motšo/O Mosoeu)

PDC Bearing Product Series

Thibelo e sa Thing ea Carbide Wear-Resistant

Thepa ea metsi ea Carbide

PC103-I21-C10-EU Mocheso o Phahameng oa Mocheso o Honyetseng Thipa bakeng sa Sekhabiso sa Litšepe se Phahameng sa Lebelo

Alloy ea Stellite

Carbide Gun Drill (Deep Hole Cutting Insert)

Stellite Alloy Welding Electrode

Six Axis Drilling And Milling Composite Deep Hole Drill (Habeli Spindles)

Likhetho tsa Mashala

Leqephe la motsoako oa B6 Stellite Alloy

Motsoako oa Plate Substrat

Nozzle

Stellite Alloy Valve Probe bakeng sa Indasteri ea Petrochemical

HMS25 HMS35 HMS50 Deep Hole Honing Machine

Ke kopa o re siele molaetsa

* Lebitso

*Email

Fono / WhatsApp / WeChat

* Seo ke lokelang ho se bua.